Cornices and lambrequins are padded with polyester fiberfill and constructed of wood or chipboard.

Non-directional and solid fabrics should be railroaded to eliminate seams. Matching welting is standard on all cornices ad is applied to the top and bottom adges. Coordinating colors for welting has a more dramatic effect.

When ordering to fit tight applications, (i.e. wall to wall, bay windows, for example), be sure to measure at the elevation of this installation. "Exact outside face measurement - wall to wall installation". Allow one inch for clearance.

Swags

Swags are top treatments or balances, used over draperies or blinds, or sometimes alone. They are usually draped into soft, graceful folds, using fabrics that drape easily. It is more interesting to use an odd number of swags. Swags should be lined.

Swags may vary in width from 20\" to over 70\". Very small swags have only a few folds. Extremely wide swags will have a limited drop length.  The width of the swag is determined by the board face and the number of swags that will be used on each treatment.

Traditional Swags&Cascades

Overlapping swags draped gracefully across the width of the window make an elegant and formal window treatment. Jabots, the decorative side pieces, are constructed to create a cascading effect.

Linear Swags&Cascades

Most commonly used in a bay window where overlapping swags are inappropriate. Swags are butted together and sewn end to end. Decorative cascades and/or rosettes are used to conceal the seams of the swags and the heading of underdrapes. Jabots are used as the finishing touches on each end.